WW5012. Diamond Electroplated Files

Features include:

Nickle coated
Shape: flat, round, triangle, semi-round, square, etc.
Length: 4", 6", 8", 10"
Diamond powder electrodeposited on the steel billet; suitable for the repair of carbide alloy,
quench mold and manual finishing on jade article ,glass, ceramic etc

Shape	Overall length(mm)	140	160	180
	Coated length(mm)	50/70	50/70	50/70	These files are manufactured by electro-plating diamond grit in position on precision forged and ground steel blanks. The evenly distributed,long-lasting and sharp layer guarantees a high filing performance. Diamond needle files are suitable for filing hardened steel and tungsten carbide material in the manufacture of cutting dies,punching and press tools as well as glass,ceramic and fabric reinforced plastics .
	Shank(mm)	3	4	5
	Cross section	5.4*1.2	7.3*1.6	9.2*20
Flat	Article number	50120101	50120102	50120103
	Cross section	2.6*2.6	3.4*3.4	4.2*4.2
Square	Article number	50120201	50120202	50120203
	Cross section	3.6	4.8	6.0
Three square	Article number	50120301	50120302	50120303
	Cross section	2.9	3.9	4.9
Round	Article number	50120401	50120402	50120403
	Cross section	5.2*1.7	6.9*2.2	8.5*2.9
Halfround	Article number	50120501	50120502	50120503
	Cross section	5.0*1.8	6.3*2.5	7.8*3.4
Crossing	Article number	50120601	50120602	50120603
	Cross section	5.5*1.9	7.1*2.7	8.7*3.4
Barrette	Article number	50121001	50121002	50121003
	Cross section	3.4*2.4	4.4*3.4	5.4*4.3
Oval	Article number	50120901	50120902	50120903
	Cross section	5.41.70.6	7.02.30.8	8.731
Knife	Article number	50120801	50120802	50120803
	Cross section	5.4*1.2	7.3*1.6	9.2*2.0
Equalling r.e.	Article number	50120701	50120702	50120703

Sets Available


5012S01, 5pc. Nickel Coating Diamond Files in 100mm overall length	5012S02, 5pc. Chromium Coating Diamond Files in 140mm overall length	5012S03, 10pc. Diamond Files in 140mm overall length	5012S04, 10pc. Diamond Files in 160mm overall length

Remark:

Other specifications and sizes are available upon request.